This is just a quick summary of the equipment for sale. I will be adding more info as I can get to the gear in storage, and grab specific specs, and better photos. Most of these images were taken either as the lab was being initially setup, or as it was being taken down.

It’s a rag tag collection of individual pieces that when pieced together and running efficiently is good for a 1 or 2 man crew to pull down 1L per hour of BHO. The goal for us is to NOT piece out this system, but sell it as a whole. It IS turn key, and setup assistance can be worked into a price. Speaking of price, the market isn’t what it used to be, so there may be some wiggle room here or there. Shoot me an offer, just don’t lowball me… I don’t play nice at that point. :)

Total invested into all of this is near the $200K range from start to finish. Keep that in mind.

BHO Extraction Equipment

Purge Labs:

2 x 25lb material vessel, macerating (NOT jacketed, old style with tri-clamp end, website says new style is 30lb, I avg’d loading 22lbs)

1 x 100L collection vessel/reactor with sight glass, jacketed (old style with tri-clamp lid)

1 x 250L recovery tank with sight glass, jacketed, washdown spinner

1 x tube and shell heat exchanger, 102 tube, 8”x48”? (-3, 99 tubes total. Purchased from Purge as reconditioned)

1 x 18” sieve filter shell

1 x 24” sieve filter shell

Misc steel braided hosing for all stages of operation, including recovery lines to and from MVP pumps

Misc Hardware

2 x MVP-6CFM vapor recovery pumps (one under 150 hours since new, one rebuilt pump head within last 150 hours)

1 x AR10 American Rotary 3 phase converter with extra start capacitor

1 x ADX15 American Rotary 3 phase converter

1 x Rheem 55gal hot water heater with digital controls, 150F max temp

1 x Grundfos recirculating heat pump

1 x Touch Science -40C chiller (SPECS SOON)

1 x PRM-HC-03PAC1 Industrial chiller, -5C, R-407C freon

5 x 100lb N-Butane tanks, emptied and vacuumed down before sealed (no explosion risk while storing) clean and certifiable

1 x cylinder dolly

1 x BVV 1.9 cuft vacuum oven

1 x BVV vacuum chamber/pot, used primarily for decarb, so the acrylic lid has surface cracking. (Still holds vacuum, just hard to see thru)

1 x heater for pot base, adhered to bottom of chamber, up to 150F setting, works incredibly well

1 x explosion proof exhaust fan, 8”

1 x non-static ducting 8” x 25’

1 x exhaust ducting for chiller fan, flexible, 18”x 12’

Misc vacuum pumps, 3 or 4 total (SPECS SOON)

2 x 1.5” EPDM hoses, 3’ length (used from column to reactor, and heat exchanger to recovery tank, largest diameter in system, most durable)

Misc valves fittings and hoses to operate entire system.

Misc hardware and valves for a 3″x48″ sleeved column and honeypot individual system. May need a valve or two.

MORE INFO AND PICS TO COME SOON. TEXT OR CALL FOR FASTER INFO INQUIRIES.